80L Kneader Mixer Strengthen type
Basic Info
Model No.: 80L Strengthen type
Product Description
Advantage
1. The main Internal rubber mixer chamber is whole set casting by high anti abrasion alloy steel, after special dealing then electroplating with hard chrome.
2. The air cylinder magnetic valve is imported famous brand, other small magnetic valve is Taiwan brand.
3. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.
4. The mixing shaft is made of nickel & chrome alloy steel. The high abrasion part is additional welded with imported anti abrasion welding rod, then electroplating with hard chrome which is more durable.
5. All main electrics are imported, the alternating current contactor is Shilin brand.
6. The anti leakage unit of side wall is made of high-tech material which is wear-resisting and easy to maintain.
7. "M" shape of the pressure gland which make the mixing more thorough and even.
8. The main motor of Pressure-Type Internal Mixer ampere meter is installed in the electrical control panel, under normal running, when the pressure of the mixing chamber is too big, the current exceeds the set value, the connector will automatically adjust the gland`s up and down via the magnetic valve to remit the pressure of the mixing chamber.
9. The mixing chamber is bigger, the diameter of the air cylinder is bigger and gear reducer is also bigger, which enhance the mixing effect, save mixing time and also save the cost.
Main parameter
| 80L kneader mixer detail information (Strengthen type) | |
| Motor power | 160KW 6P AC |
| Material feeding | Front/back |
| Temperature adjustment | Steam heating or water cooling |
| Mixing capacity per batching | About 80kgs/time |
| Mixing time | 4-8mins/batching |
| Rotor RPM | Front axle RPM/rear axle RPM (depending on buyer requirement) |
| Temperature difference | ±5º |
| gear reducer | ZLY450 |
| Gear width | Input 130mm, output 160mm |
| Tilting angle | 140° |
| Main air cylinder size (mm) | 400×950 |
| Piston rod diameter (mm) | 130 |
| Mixing chamber size (mm) | 680×600×800 |
| Two rotors center to center space (mm) | 405 |
| Rotor bearing diameter | 170(mm) |
| Machine size | 4000x3200x3700 |
| Machine weight | 12000 |
Public Equipment
1. Power: 380V,50Hz,≧200kw
2. Air Compressor: 6-8kg/cm² 1.5cbm/min
Machine Structure
1)Units
1. Machine base frame: welded by I steel and steel plate.
2. Mixing chamber: is welding by wear-resisting alloy steel,with special design of heating and cooling system.
3. Mixing shaft: the rotors are made of 20crMo forging units, the shaft is made of 20crMo whole set welding. Both rotors and shafts are hollow design which water or steam can get through.
4. Bearing base: made of ZG20 casting steel. Self-aligning bearing.
5. Leakage-proof device: the whole mixing chamber is under special design and also adopts special material.
2)Pressure device
1. The pressure gland is made of alloy steel,which is designed with small water pipe to cool it. During the mixing,it can provide pressure to the raw material.
2. The air cylinder: with famous good quality sealers.
3. Magnetic valve: Japanese CKD brand.
3)Discharge device
1. Structure: worm gear structure to discharge the material.
2. Tilting angle: 140°
3. Tilting motor: 7500W
Electrical control cabinet
1. Floor stand electrical control cabinet.
2. Standard electrical supply and device.
3. Hongtai standard electrical cabinet or under customer special request.
4. Automatic temperature setting,reveal and control.
5. Time setting, thermometer, current meter and alarm.
Pictures of Products
Operation Procedures
Overseas service
Shijiazhuang Longxuan Trading Co., Ltd. is located in Shijiazhuang, the capital of Hebei Province with convenient transportation. Our company was established in Feb. 2012. Our company is professional in supplying industrial equipment, covering pipe processing machinery, automatic welding equipment, cutting machine, etc. Our company always adheres to "credibility and integrity, efficiency" purpose and develops rapidly, creating excellent results and our company has fostered a good image in suppliers and foreign customers. And our company has established long friendly cooperative relationships with many high-tech machinery manufacturing enterprises.
Our company will continue to provide our clients with professional quality integrated solution in automatic welding, cutting and robot welding.
For further relevant product images or details,please send your inquire Details in the below,click "Send" or contact me directly!
Product Categories : Plastic & Rubber Processing Machinery > Mixing Mill Manchine